Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8
3 Easy Steps to Buy Your Tiles
-
-
It is recommended to increase the surface calculated on site by 10% in anticipation of any occasional wastage due to cutting.
-
Our unglazed tiles are non-rectified, dry pressed and have a low water absorption rate.
Our tile sizes can therefore vary according to tolerances determined by recognized standards (French Cahiers du CSTB and NF EN 14411 standard in force).
Consequently, it is essential to use a 2 to 3mm grout width for all tiles supplied loose, and potential adjustments to grout width may be necessary due to this constraint.
-
Because our tiles are made from natural raw materials, some slight shade variations may occur from one batch to another for tiles of the same color.
Therefore, the availability of identical shades in cases of replenishment or additions to previous projects cannot be guaranteed.
