AS-39 | [70 x 70mm]

£4.37

Information

Unglazed victorian floor tiles, 70x70mm, thickness: 9mm

Colours: white, black, dark  green

Field per square metre

£284.00 – loose tiles
£389.00  – assembled sheets including drawing

Border per linear metre

£38.00 – loose tiles

Price Excludes VAT

Free Quotation

We provide free quotations based on your floor measurements and chosen tile design

Please note your chosen tile design code (for example VP-1, RS-10, BP-8, etc.) and send it to us with your measurements.

Quantity:
Request Quotation

Information

Unglazed victorian floor tiles, 70x70mm, thickness: 9mm

Colours: white, black, dark  green

Field per square metre

£284.00 – loose tiles
£389.00  – assembled sheets including drawing

Border per linear metre

£38.00 – loose tiles

Price Excludes VAT

Free Quotation

We provide free quotations based on your floor measurements and chosen tile design

Please note your chosen tile design code (for example VP-1, RS-10, BP-8, etc.) and send it to us with your measurements.

Information

Unglazed victorian floor tiles, 70x70mm, thickness: 9mm

Colours: white, black, dark  green

Field per square metre

£284.00 – loose tiles
£389.00  – assembled sheets including drawing

Border per linear metre

£38.00 – loose tiles

Price Excludes VAT

Free Quotation

We provide free quotations based on your floor measurements and chosen tile design

Please note your chosen tile design code (for example VP-1, RS-10, BP-8, etc.) and send it to us with your measurements.

 

3 Easy Steps to Buy Your Tiles

 
  • We usually spend 1 to 4 weeks on each project that we work on. This includes the time needed to design, asemble and prepare your order for your project.

  • It is recommended to increase the surface calculated on site by 10% in anticipation of any occasional wastage due to cutting.

  • Our unglazed tiles are non-rectified, dry pressed and have a low water absorption rate.

    Our tile sizes can therefore vary according to tolerances determined by recognized standards (French Cahiers du CSTB and NF EN 14411 standard in force).

    Consequently, it is essential to use a 2 to 3mm grout width for all tiles supplied loose, and potential adjustments to grout width may be necessary due to this constraint.

  • Because our tiles are made from natural raw materials, some slight shade variations may occur from one batch to another for tiles of the same color.

    Therefore, the availability of identical shades in cases of replenishment or additions to previous projects cannot be guaranteed.